What's New in Revit 2021 | MEP?

An overview of the new features and updates in Revit MEP 2021

What's New in Revit 2021 | MEP?

For Revit MEP 2021, I am pleased to say there has been another focus on electrical design with particular attention paid to electrical distribution. Also, the long awaited circuit naming to UK standards has finally arrived, with an easy to use, easy to set up method of customizing this important aspect of working with electrical circuits and panel schedules in Revit MEP.

Electrical Circuit Naming

Circuit naming to UK standards has been at the top of many users wish list, with different work arounds devised to address this area. I am really pleased to say that the 2021 release of Revit MEP now includes a flexible way to customize circuit naming.

Electrical Setting contains a new feature called Circuit Naming. Here the electrical designer can create a new scheme, with an appropriate name, and choose from a list of properties to be included in that scheme, much the same as creating a schedule or customized tag. The available properties and set up are shown below.



Once the scheme has been created, it can be applied to a panel or switch board, from the Circuit Naming parameter, it then becomes the naming scheme for panel schedules and can also be used in tags.

Panel Schedule Under Sheet View

Although it was previously possible to add panel schedules to drawing sheets, the only way to check which panels were on which sheets was to open each of the drawing sheets and check. Revit MEP 2021 has made this task much easier by adding panel schedules to the list of other views seen on each sheet found under the Sheets heading of the project browser.

Phase Selectable Switchboard Circuits

Revit MEP 2021 allows the electrical designer to choose which phase of a switchboard a single phase panel will be connected to. Previously these would all default to the first phase on the switchboard with no way of changing that arrangement. Switch Phases is a new feature specifically designed to address this and allows the electrical designer to select any single phase load on a switchboard panel schedule and to move it to a different phase.

Switchboard Circuit Quantity

The property Maximum Number of Single Pole Breakers found on panels and switchboards determined the number of slots available within the respective board. For switchboards this proved to be a problem as 3-phase circuits only took up one row on the panel schedule giving an inaccurate view of the number of available slots. A switchboard with a value of 12 for the maximum number of single pole breakers would become full after adding four 3-phase loads, while the switchboard panel schedule would show only the first four rows as occupied, possibly giving the appearance of available capacity.

For switchboards this property has been changed to Maximum Number of Circuits so that the number of circuits created now corresponds with the number of rows occupied on the switchboard panel schedule.

Single Phase Circuits and Panel Schedules

Two specific areas have been addressed in Revit MEP 2021 for single phase circuits and panel schedules.

Previously:

  1. Loads connected to a single phase board would show as being connected to different phases on the panel schedule.
  2. There was no allowance in panel schedule template options to show only the phase the loads were connected to, only for hiding or disabling the third phase

The first point has been addressed In Revit MEP 2021 so that all single phase loads now connect to the same phase on a distribution board. Secondly, when editing a panel schedule template, the previous option to hide or disable the third phase has been replaced with hide or disable columns for unused phases, meaning that schedules for single phase panels now only show the connected phase.

Frame Size Parameter for Spare Circuits

When adding a spare into a panel schedule in previous versions of Revit MEP it would have been represented by a dash in the Frame Size column. This was because there was no frame size parameter for Spares.  For Revit MEP 2021 this has been updated so that the frame value is now displayed against spares added to your panel schedule and that value can be amended in the spare’s properties.



Watch our video below to see these new features and updates in action:

Note: The below webinar recording was created by Excitech prior to becoming Symetri in January 2021, following its acquisition by Addnode Group. All Excitech products, services and solutions mentioned in this recording are available through Symetri.

 

Blog

The Complete Autodesk Software List - All 112 Autodesk Products in one list

30 September 2024

Have you ever wondered how many product titles Autodesk has in its design software portfolio? Well its 112 at this point in time, but with the continuous acquisitions this number is ever increasing. The design, Digital Prototyping, Building information modelling (BIM) etc……. tools created by Autodesk cover  multiple industry sectors and are used by over 10 million users in more than 185 countries. That’s pretty incredible!

Learn more